1 / 6
Urban T22 2x22kW
For this charging station, around 600 € including installation, an individual would receive up to 1.000 € and a company up to 1.300 €.
Installation must be carried out by a registered electrician. Calculate exactly
Description
The URBAN Gen4 free-standing charging stations are designed for reliable charging at publicly accessible locations and are resistant to demanding weather conditions and possible vandalism. They are available in versions with two Type 2 cables or with various combinations of Type 2 and/or Schuko sockets. Depending on the version chosen, they allow charging in Mode 1–2 and Mode 3.
They also allow simultaneous charging via one active socket on each side, with a single-phase or three-phase connection. The sockets are installed at a height accessible to persons with reduced mobility, which ensures simple use of the charging station. The aluminium housing contains separate electrical protection for each socket, which simplifies installation and maintenance and ensures the highest level of safety.
The URBAN Gen4 is equipped with a 7-inch screen and LED status indicators. The screen displays QR codes for authentication and diagnostics, which helps to reduce downtime and provides a multilingual user experience.
The charging stations support the OCPP protocol for simple connection to management platforms. They are also compatible with our dynamic load management (DLM) system, which adjusts the charging power so that total consumption does not exceed the agreed connection capacity. The charging stations can also be upgraded with a QR code payment system, which allows users to pay easily by card on their phone, without installing an app. The integrated FURS module takes care of automatic issuing, tax confirmation and sending of the receipt to the user. The solution enables a quick and cost-effective introduction of paid charging without an additional payment terminal. If desired, an upgrade with a physical POS terminal is also possible.
Areas of use: The URBAN Gen4 free-standing charging stations are particularly suitable for all types of outdoor car parks. They are intended for installation in public squares, at shopping centres and airports, at vehicle sales and rental companies, in private car parks and at other similar locations.
Technical data
| Charging power | 2 × 22 kW (three-phase, 400 V, 32 A per output) |
| Connector | 2 × TIP2 |
| Number of simultaneous charges | 2 (one active socket on each side) |
| Charging mode | Mode 3 (IEC 61851-1) |
| Power supply | Three-phase 400 V ~ (± 10%) |
| Protection | MCB 40 A (C) circuit breaker and type A residual current protection 30 mA + 6 mA DC on each outlet |
| Energy metering | MID class B meter (EN 50470-3) |
| User interface | 7-inch display with QR codes, colour LED charging indicator, RFID/NFC reader |
| Communication | Ethernet, Wi-Fi 2.4 GHz, OCPP 1.6J (2.0.1 ready) |
| Load management | Compatible with DLM (dynamic load management) |
| Protection rating | IP55 / IK10 |
| Operating temperature | −5 °C to +50 °C (with low-temperature kit down to −30 °C) |
| Relative humidity | 5 to 95 % (non-condensing) |
| Enclosure | Aluminium and ABS |
| Mounting | Floor-mounted with 4 bolts |
| Dimensions (W × H × D) | 446 × 1.544 × 288 mm |
| Weight | 42 kg |
| Optional equipment | 4G/GPRS modem, Payter Apollo payment terminal, type B residual current protection, surge protection (class II), low-temperature kit |
| Standards | IEC 61851-1, IEC 61851-21-1, IEC 62196-1, IEC 62196-2, LVD 2014/35/EU, EMC 2014/30/EU, EN 18031-1 |
Specifications are subject to change without prior notice.
Let us prepare a quote for the Urban T22 2x22kW
We reply within one working day. For companies and municipalities we also prepare a technical specification for public procurement.
Similar models
